![]() Indeed there is not a big number to choose from.ĪDI-8-QS (QS ? Quantum Supertechnology from Aliens) There must be an Adat Input socket for getting computer sound. The device has probably 8 XLR sockets on the back ( Outputs ) but they do not deliver sound from the computer. Great if that's what you need, but lots of people think they're from the ADAT input. The analog outputs carry the signal from the mic preamps. The Focusrite OctoPre is analog inputs only. ![]() The converter is the master ( I learned it that way) clock internal.Īll other devices are slave, clock external adat input.īehringer ADA8200. Those are analog converters with 8 Ins and 8 Outs for TRS cables.Īdat Out goes to Adat In of the other unit and wise versa. If so, bring back the ADI8-DD to the sales store and try to get an ADI8-QS or an ADI8-DS or an ADA8200. Speaking of TRS balanced cables, this means you want to connect analog gear, may be some synths, keyboards etc. Those devices have AES connection (XLR connectors) and it is cool to have them in the system digitally only, without analog conversions. This is useful for connecting digital devices like multieffectprocessors Eventide H8000 or Eventide Eclipse for example. You can convert the UCs adat digital 8-channel format into AES/EBU. Your device ADI8-DD is a digital format converter and not an analog converter ! OK I think you are complete lost on the wrong Autobahn you Geisterfahrer ! What do you want to connect to this patchbay ? What is your desire for having this ADI8-DD ? Under your point 4) Source: AES change this to Adat Second Toslink cable connect from the ADI8-output to the UC Adat Input. It should be this way with two toslink lightpipe cables :įirst Toslink cable connected From ADI8-input to the UC Adat output. Probably you did the connections right but writing it down here became salad ? Īny hint what am I doing wrong is highly appreciated! Mic1 Mic2, AN 3 - AN 8 SPDIF AS 1 AS2 ADAT 3 - ADAT 8. Yet, I cannot bring any signal in (?) or out (?) the ADI-8. However, the switches are set as folllows.Īll 8 inputs of the UC working just fine. XLR female to TRS balanced connectors (four) from the outputs (ADI) to a patch bay.Ĥ) The switches on the ADI-8 are set as follows (from left to right):ĭid not use the outs. However, there is one setting that does not exist in the handbook:ģ) XLR male to TRS balanced connectors (four of them) from the inputs (ADI) to a patch bay. My attempt to connect both units totally failed.ġ) I connected the ADAT out (main) of the ADI-8 to the ADAT in of the UC and the ADAT in (main) to the ADAT in.Ģ) Fireface UC settings are according to the handbook. It's that bad that even the handbooks are of no use to me. Please be kind with me: I am a total noob if it comes to digital recording and its infrastructure. However, my problems start with my newly acquired ADI-8 DD.
0 Comments
Leave a Reply. |